集萃印花网
台州市聪慧精细化工有限公司
首页 > 产品供应 > 印花材料 > 台州市聪慧精细化工有限公司 > 鞋材立体水性墨(常温耐折7-8万,低温耐折15-20万,双组份)
鞋材立体水性墨(常温耐折7-8万,低温耐折15-20万,双组份)
鞋材立体水性墨(常温耐折7-8万,低温耐折15-20万,双组份)
分享到: 推荐(0)关注
价  格:面议
供应总量:不限
联 系 人:
0576-82712222
联系电话:
QQ交谈
联系客服:
产品推荐
详细信息
联系方式
手机扫一扫
  • 品牌: 聪慧
  • 型号: 0371
  • 粘度: /°C
  • PH值: °C
  • 气味: /
  • 弹力: 100T
  • 细度: /um
  • 外观: /
  • 用途:
  • 着色力: 100%
  • 流动度≥: /mm
  • 保质期: 12个月
  • 单件净重: 5KG,25KG,50KG
  • 树脂类型: /
  • 离子性能: 阴离子
  • 外观颜色:

一适用:

莱卡布,牛仔布(涂层布,压光布除外)、尼龙布、TPU、PU皮革,及一些高弹性面料等.

二.性能指标:

外观及组成:乳白色状粘稠体,聚氨酯聚合物

布氏粘度:140000~160000CPS

PH值:7.0-8.0

离子类型:阴离子

固体含量:65%±1

三.特性:

立体感强,触边性好,高附着力,高亮光,拉伸力好,手感中软,抗回粘性能优,表面光滑,耐水解,耐曲折,抗撕拉力强,常温耐折7-8万,低温耐折15-20万(双组份)

四.操作应用:

1.本产品一般使用80目120目网布,根据图案的不同丝网一定要绷紧,这一点相当关键:

2.为了保证印制效果,一般不要制作太厚网版,根据厚度不同需要印5—8次,在使用厚网版印刷时印完第一次需待底层干透后再进行第二次印刷,一般印刷3—5次就能达到2-3毫米以上的高度。

3.本产品不易塞网,过稠时可加入适当水浆搅拌均匀进行稀释。

4.在自然风干48小时后,再过温150度8-15秒,过温时尽量将面料过反面。

5.使用时加入1%-2%催化剂或交联剂。

五、注意事项:

1、自然干燥时间与气温和空气湿度有关。

2、调色可根据客户需要颜色的深浅来调入色种的分量,颜色调入太多容易引起掉色现象,色种最好控制在5%之内.

3、如印容易掉色的深色布,需要测试颜色是否会升华到胶浆表面上,以减少不必要的损失。

4、使用本透明产品印花,要稍加白胶浆掺和进行调色印花有利于在纺织品面料上印花着色度饱和,更好发挥透明浆的应用效果

5、由于印花面料的多样化,和一些外在的不确定因素做大货之前先小样实验确定以后方可批量生产。未确定情况使用或操作不当引起的质量问题本公司概不负责.



Other detailed information

Brand

Conghui

Model

0372

Viscosity

140000-160000CPS

PH Value

7.0-8.0

Odor

/

Strength

100T

Fineness

/

Appearance

/

Usage

/

Color strength

100%

Fluidity

/

Shelf life

12months

Single net weight

5KG, 25KG ,50KG

Resin type

/

Ionic

Anion

Appearance

/

一.Substrates:

Lycra, denim(except coated fabric, press polishing fabric),nylon,TPU, PU leather and some high stretch fabric.

二.Performance indicators:

Appearance and composition: milky white viscous body, polyurethane polymer

Brinell viscosity:140000-160000CPS

PH Value:7.0-8.0

Ionic: anion

Solid content:65±1%

三.Features :

Strong three-dimensional sense,good edge,high adhesion,high glossiness,good tensile strength,soft hand feel,non-after tack,smooth surface,resistance to washing,resistance to folding,high resistance to tear. Normal temperature folding is 7-8万,low temperature folding is 15-20 万(two-component)

四.Operation application

1.This product usually use 80-120mesh screen, according to different patterns,the silk screen should be tightened, this one is very crucial.

2.In order to guarantee the printing effect,do not use too thick screen as usual,according to different thickness,print 5 or 8 times,when using thick screen to print,print in second time after the base dries completely in first time,as usual ,it can reach 2-3mm when printed 3-5times.

3.This product is not easy to mesh plug,when it is too thick, you could add appropriate water to stir evenly and mildly.

4.After air dry for 48 hours,and overheat at 150for 8-15seconds,when in the process of overheating should put the fabric in opposite side.

5.When using it,you could add 1%-2% catalyst or cross-linker.

五.Notes

1.The time of air dry is related to temperature and air humidity.

2.Adjusting color according to shade of color that customers need to add amount of pigment.If add too much it will lead to phenomenon of rubbing off, the amount of pigment should be controlled within 5%.

3.If prints on dark fabric that is easy to rub off, should be test color whether it sublimates on the surface of fabric,in order to reduce unnecessary financial losses.

4.Using clear product to print,should add white paste to adjust color printing,it makes printing looks full and reach the better application effect of clear paste.

5.Due to variety of fabric and some uncertain factors , you should make a test before in a batch production.Our company is not responsible for quality problem which caused by wrong operation or using under uncertain condition.


公司名称:
台州市聪慧精细化工有限公司
联 系 人:
电  话:
0576-82712222
手  机:
18267678889
传  真:
0576-82455068
地  址:
浙江 台州市路桥区 银安街266号查看地图
商铺地址:
http://tzconghui.ccedpw.com
公司主页:
http://tzconghui.ccedpw.com
Q  Q:
QQ交谈

还没有找到合适的产品? 赶快发布求购信息,让供应商主动来找您!收藏此信息
免责声明:以上信息由用户自行提供,内容的真实性、准确性和合法性由发布用户负责。集萃印花网对此不承担任何责任。
联系我的时候!请说明在集萃印花网上看到的,我好做备案!